Jiangyin Yuzhe Intl Trading Company

If you are looking for new design, full automatic plastic extrusion lamination machine on paper non woven aluminum foil fabric, or you are going to import high speed PLC control products from a such factory, or you are planning to check the price with a such golden supplier, with large output plastic extrusion lamination machine on paper non woven aluminum foil fabric for sale and providing with plastic extrusion coating lamination machine on paper non woven aluminum foil fabric, plastic multilayer extrusion lamination machine on paper non woven aluminum foil fabric, plastic extrusion lamination coating plant on paper non woven aluminum foil fabric, plastic co-extrusion laminating machine on paper non woven aluminum foil fabric on promotion, Yuzhe Intl Trading Company is always at your service.

Ⅰ.Main characteristic and performance

1.The whole technique flow from unwinding of raw material to coating and winding .It adopts the advanced electric equipment and mechanism equipment, such as PLC Controller, human-computer interface and it could be controlled solely or together with high autoimmunization;

2. The double working position of unwinding adopts the automatic rectifying system. It adopts automatic changing, cutting and material joining without reducing speed and the tension of the unwinding adopts the PLC controller which ensures unwinding be smooth and in high speed; The double working winding adopts the vector inverter and PLC controller. The coil material changing adopts the automatic changing. Besides the cutting and material joining without reducing speed and this machine is suitable for coating laminating on the coil paper, aluminum foil, unwoven fabric, weave, BOPP, PE and so on. It adopts the own patent technology and the products have high quality: high peel off strength, good matte effect, symmetrical thickness, good leak tightness etc. Every standard of the products manufactured by this machine can reach or exceed the industry standards. This machine is one of the most popular heating melt coating laminating machine in China. 

3. The speed of extrusion and molding is controlled by PLC and the molding roller, silicone roller, assistant cooling roller adopt recycle water cooling structure. This structure can make the good coating effect. The molding rollers clutch uses the pneumatic controller;

Main technical specifications:

1.Screw and barrel: φ65mm，L/D:28:1,material: 38CrMoAl, surface with nitride, with special mixed segment, great effect, large output;

2.T shape Elastic die head : new type featheredge mould，Material: 38CrMoAl, with quenched treatment, excellent in toughness and hardness,  be not out of shape with high temperature frequently ;

3. The gear box of extruder motor applies high strength hard teeth retarder with high airtight;

4. Digital intelligent corona treatment;

5. Dimensional range: 20gsm ～100gsm roll non-wooden softness material;

6.Coating material:  PE,PP;

7.Coating  width : 2000～2400mm;

8. coating thickness: 0.012～0.03mm(single layer);

9.Symmetrical coating degree: ±8%;

10.Strength of peeling off: 3～5 N/30mm (according to the actual coating material);

11.Max extruding output: 280kg/h;

12. Speed range:0-100m/min;

13. Double unwinding, magnetic powder tension controlling, max unwinding diameter: φ600mm;

14.four roller rewinding,  counting meters automatically, max winding diameter: φ600mm;

15.Pneumatic roller of unwind and rewind:3 inch （φ73mm）;

16.Total power: about 150 Kw;

17. Dimension size (L×W×H): 8500mm×8800mm×3200(mm);

18.Gross weight: about 16000kg

Unwinding&Rewinding Part

Extrusion Part